Engineered & supported in Hudson, Ohio since 2012330-633-7735 · info@slewpro.com
Potesta & Company
SlewProSlimProRackProRhino Gear
SlewPro blog

SlimPro Thin Section Bearings: Kaydon® Equivalents, Lines and How to Choose

By Richard Potesta · January 29, 2024 · Updated October 19, 2026 · 2 min read

SlimPro Thin Section Bearings: Kaydon® Equivalents, Lines and How to Choose

Thin section bearings keep the same small cross section as the bore gets larger, so a 10-inch bearing can be as slim as a 1-inch one. That saves space and weight and lets designers use large, hollow shafts for cables, optics or other components, which is why they are found in robotics, medical imaging, aerospace, antenna and radar pedestals, semiconductor equipment and machine tools.

SlimPro thin section bearings are our catalog range, with a direct equivalent for every bearing in the Kaydon® Reali-Slim® catalog.

Using a Kaydon bearing today?

Add SP- to the Kaydon part number and you have the SlimPro equivalent: KA020XP0 becomes SP-KA020XP0, with the same dimensions and the same mounting. Enter any Kaydon number on the SlimPro page, including precision-class suffixes and sealed or stainless prefixes, and it shows the closest catalog part and what, if anything, changes.

Six product lines

  • Open, chrome steel: 52100 chrome steel, the standard choice for clean, lubricated environments.
  • Open, Armoloy® plated: thin dense chrome plating for corrosion and wear resistance, at the same dimensions as the open series.
  • Sealed: double-sealed and pre-lubricated, for contaminated or maintenance-free applications.
  • Sealed, Armoloy® plated: double-sealed and plated, for applications that are both wet and dirty. The equivalent of Kaydon "L" bearings. Made to order.
  • Stainless steel: stainless rings and balls for washdown, food, medical and corrosive environments.
  • Metric: true metric thin section bearings in 8, 13 and 20 mm cross sections.

In inch sizes, bores run from 1 to 40 inches, with cross sections from 3/16 inch to 1 inch.

Three bearing types

  • Radial contact (Type C): designed mainly for radial load, with light thrust capacity.
  • Angular contact (Type A): radial load plus thrust in one direction; usually mounted as an opposed pair.
  • Four-point contact (Type X): radial load, thrust in both directions and moment load in a single bearing, often replacing a pair of angular contact bearings and saving space.

Precision

Catalog bearings are made to precision class 1. Classes 3, 4 and 6 are available for applications that need tighter runout and diameter tolerances; the tolerance values for each class are on every SlimPro specification sheet.

How to choose

  1. Load: radial only, thrust in one direction, or combined loads with moment? That decides the type.
  2. Environment: clean and lubricated, dirty, wet, washdown or corrosive? That decides the line.
  3. Envelope: the bore and outside diameter you have room for, and the cross section that carries the load.
  4. Precision: standard class 1, or a higher class for tighter runout.

The SlimPro bearing selector takes you through these steps and produces a specification sheet with dimensions, load ratings, limiting speed and tolerances for the part you choose. The SlimPro catalog lists every size.

Not in the catalog?

Send us your loads, speeds and envelope, or the part you are replacing, and our engineers will recommend a SlimPro bearing or design one to your application. Request a quote or talk to an engineer.

Have an application in mind? Our engineers will help you specify the right part. Send us a drawing or request a quote.

Talk to an engineer

Need help selecting the right part? Our engineers will size it, cross it, and quote it — usually within 1–2 business days.

Not in the catalog? We design to your application, with no engineering charge.